What do I do if I am using a PopSockets grip with an iPhone 8/8 Plus or iPhone X?

If you are using your iPhone 8/8 Plus or X phone without a case or glass back protector, you’ll need to apply a special adhesive disc to the back of your phone before attaching your PopSockets grip. Because of an anti-fingerprint coating on the glass backs of these devices, your PopSockets grip won’t stick without the disc.

To get a disc please go here: https://www.popsockets.com/products/iphone-8-8-plus-x-adapter-kit

A disc can be repositioned up to three times.

 Step-by-step instructions:

  1. Carefully pull back the liner and peel the disc away from the liner, exposing the adhesive side. Don’t be afraid to use your fingernails to separate them from each other.


2. Apply the adhesive disc to the back of the phone, sticky side down. Carefully smooth away any air bubbles. 


3. Remove the film from the PopSockets grip and mount it on the center of the disk.


4. All done! Enjoy the PopSockets life.



Was this article helpful?
27 out of 41 found this helpful
Have more questions? Submit a request


Article is closed for comments.